Tech on call for Locksmith
Emergencies after hours @
formerly Ingersol Rand (IR)

Dependable performance for high traffic commercial applications.
At Schlage, they know that every product you specify has to stand up to constant
designed to deliver ADA compliant accessibility and constant, reliable performance.
The AL-Series is best for buildings with medium to high traffic flow, such as interior
office doors, banks, retail spaces and hotel guest areas. With a Grade 2 ANSI
rating, and styles and finishes to suit your building’s design, the AL-Series fits right
where you need it.

The ND-Series has long been one of Schlage’s best selling mechanical locks for
good reason - it’s tough, durable, Grade 1 rated and fits a wide variety of
applications. Now we’ve made our trusted ND-Series lock even better by making it
installed correctly the first time will last longer and perform better. And the longer
the lock lasts, the lower the cost of ownership over the life of the lock. We’ve also
increased our warranty to provide 10 years of coverage. The result: greater
peace of mind that every door is safe and secured with a lock built to last.

So not only do you get our toughest Grade 1 cylindrical lock, that is ideal for use
in schools, hospitals, offices, retail spaces, colleges, universities and other

At Schlage they know that every product you specify has to stand up to constant
use and abuse. Your building’s locking systems face an additional challenge –
performance. Schlage L-Series Extra Heavy Duty Mortise Locks are built to
withstand the rigors of daily use without fail.

Exit devices are a critical part of the Fire and Life Safety egress system and will
provide safe and reliable service when properly applied and maintained. Von Duprin
designs and manufactures exit devices in accordance to ISO 9001 Quality
Management System and meets or exceeds accepted U.S. domestic and
International standards. All 98 and 99 series exit devices are UL listed for Panic
Hardware or Fire Hardware, and are certified to ANSI A156.3, 2001, Grade 1. Many
models are also certified for Hurricane Resistant Applications. Consult your local
Allegion sales consultant or the Von Duprin factory for current listings.
It is intended that the information included in this publication, when properly used, will
provide clear and reliable guidelines to the proper general selection and application.
However, the scope of the information is necessarily limited.

  •    Each closer (except 4040, 4040T, 4030, 4030T) is designed for a specific
    mounting; hinge side, top jamb, or parallel arm. 4040 closer with regular or hold-
    open arm mounts hinge side or top jamb. P4030 & P4040 closers include 62PA
    shoe required to parallel arm mount either regular or hold-open arm.
  •    Handed for right or left swinging doors, except 4000T, 4030, 4030T, 4040, and
  •    Closers to meet ADA reduced opening force requirements except 4000T
  •    Adjustable hydraulic backcheck cushions opening swing prior to 90°
  •    Separate regulation of general closing speed and latching speed
  •    Joints in regular arm and shoe adapt to uneven trim
  •    Reversible shoe to boost latching power or double lever arms
  •    Available in a wide range of standard or optional custom powder coat finishes to
    blend with door and frame
  •    Plated finishes available to accent door and frame
  •    Not designed for exterior mounting or exposed to elements

  •    1000 series closers mount three ways. Closers with regular or hold-ope arm
    mount hinge side or top jamb. Parallel arm, designated with a "P", closers include -
    62PA SHOE required for parallel arm mount. 1460T mounts hinge side, top jamb
    (pull side) and stop face.
  •    Non-handed for right and left swinging doors
  •    Closers to meet ADA reduced opeing for requirements
  •    Adjustable hydraulic backcheck cushions opeing swing prior to 90 degrees
  •    Separate regulation of general closing speed and latching speed
  •    Joints in arm and shoe adapt to uneven trim
  •    Reversible shoe to boost latching power on double lever arms

When you need a tough, reliable lock for a government/military, retail, industrial or
multi-family project, you need a Falcon B-Series lock. Our full line of Grade 2 locksets
are a perfect replacement for existing locks, or a smart spec in new construction. With
upgraded finishes these locks deliver style as well as strength. Falcon B-Series locks
feature an interchangeable core that can be removed for quick, easy re-keying, and
are compatible with SFIC products from other manufacturers. Most important, they’re
backed by one of the best names in the business.
The Falcon K Series gets back to basics by offering the most common functions, lever
styles and finishes at an affordable price. The certified ANSI/BHMA Grade 1 Falcon K
Series features conventional cylinders and small format interchangeable cores that
are compatible with SFIC products from other manufacturers. The newest addition to
the Falcon cylindrical lock portfolio delivers strength and reliability at a reasonable
9415 Burnet Rd., Ste 103
Austin, Tx 78758
512-933-0300 - ph
512-264-3060 - fax
License # B11887
Mon - Fri 8:00 - 5:00
About Us
Contact Us
High Security